Water-based thermostats 90° (6 – 9 kW)
The Ti-FSI90 Thermoregulator is an active component that compares an actual temperature value to a theoretical value and sends an adjustment command based on the observed difference. This adjustment value acts on the controller, which in turn generates a measurement to counteract the difference.
This Ti-FSI90 thermoregulator is used to regulate the temperature of molds on injection molding machines or other closed-loop temperature control systems between 20 and 90°C.
Dimensions
Height: 650 mm
Length: 650 mm
Width: 300 mm
Dimensions
Height: 650 mm
Length: 650 mm
Width: 300 mm
Caractéristiques
- Reference: Ti-FSI90
- Maximum water temperature: 90°C
- Humidity: 80%
- Altitude : 1000 m
- Tank volume: 20 liters (1.5 mm thick stainless steel sheet)
- Monitoring: of the maximum temperature
- Supply voltage: 3 x 400V / 50 Hz (3 Phases + Earth)
- Reversible pump (for draining the mold)
- Heating power: 6-9 kW; Automatic regulation
- Pump power: 0.5 kW / 400V- 1.7A
- Maximum flow rate: 50 l/min
- Maximum pressure: 5 bar
- Cooling Type: Indirect, via 8/10 copper tubes; length 9600 mm
- Cooling circuit connection: 1/2"
- Mold connection: 1/2”
- Filling: automatic with level control
- Maximum ambient temperature: 50 – 60 °C (Generally, the ambient temperature should be lower than the water temperature)
- Optional:
- - Pressure switch (0.2 and 8 bar)
- - Pressure gauge (0 to 10 bar)