Water-based thermostats 80° (9 kW)
The Ti-FSI80 Thermoregulator is an active component that compares an actual temperature value to a theoretical value and issues a control command based on the observed difference. This control value acts on the controller, which in turn generates a measurement to counteract the difference.
This product complies with the requirements of the European directive (CE).
The Ti-FSI80 thermoregulator is used to regulate the temperature of molds on injection molding machines or other closed-loop temperature control systems between 20 and 80°C.
Dimensions
Height: 630 mm
Length: 630 mm
Width: 280 mm
Caractéristiques
- Reference: Ti-FSI80
- Maximum water temperature: 80°C
- Humidity: 80%
- Altitude : 1000 m
- Tank volume: 10 liters (1.5 mm thick stainless steel sheet)
- Supply voltage: 3 x 400V / 50 Hz (3 Phases + Earth)
- Monitoring: of the maximum temperature
- Heating power: 9 kW; Automatic regulation
- Pump power: 0.5 kW / 400V- 1.7A
- Maximum flow rate: 50 l/min
- Maximum pressure: 5 bar
- Cooling Type: Indirect, via 8/10 copper tubes; 4000 mm long
- Cooling circuit connection: 1/2"
- Mold connection: 1/2”
- Filling: automatic with level control
- Maximum ambient temperature: 50 – 60 °C (Generally, the ambient temperature should be lower than the water temperature)